Breakout Box Small-99P
The RAYNOV BOB-S-99P is a high-channel-count 99-channel breakout box designed for ECU testing, measurement, diagnostics, validation, and troubleshooting. It provides convenient access to individual signals through 2 mm measurement sockets while supporting circuit interruption and fault insertion for demanding test applications.
Contact Us for Pricing
Interested in this product? Contact us now for detailed pricing and product information.
The BOB-S-99P provides a practical interface between an ECU and the corresponding DUT or test harness, allowing individual wires and signals to be accessed without working directly with complex harnesses.
Its aluminum enclosure provides a durable solution for benchtop testing and validation. The unit supports measurement and diagnostic access through 2 mm banana sockets and is designed for applications requiring reliable signal access during ECU testing and troubleshooting.
The BOB-S-99P supports CAN, LIN, DIO, PW, and ANG signal interfaces and provides circuit interruption through 2 mm/12 mm jumpers. A fault-insertion function is also available for controlled testing.
Key Features
- 99-channel breakout box
- Robust 2 mm measurement and diagnostic access
- High-current capability for ECU and power applications
- Durable aluminum enclosure
- Circuit interruption using 2 mm/12 mm jumpers
- 8 A CC fault insertion
- Support for CAN, LIN, DIO, PW, and ANG interfaces
- 100 cm cable length
- Standard configuration available
- Fully customized configurations available
Technical Specifications
The BOB-S-99P combines robust construction with versatile electrical and signal interfaces for reliable ECU testing, measurement, diagnostics, and validation. The key technical specifications are summarized below.
Applications
The BOB-S-99P is intended for use in:
- ECU testing
- Electrical measurement
- Diagnostics
- ECU validation
- Troubleshooting
- Automotive testing
- Aerospace testing
- Test bench applications
Included Accessories
- Jumpers
- Output wired circular connector
Configuration
The BOB-S-99P is available as a standard universal breakout box. Customized configurations can also be provided according to application requirements.
Safe Use
The breakout box should be connected between the ECU and the corresponding DUT or test harness. Before energizing the system, verify that all connections are correctly identified and respect the specified voltage, current, and isolation limits of the selected configuration.
For high-current or sensitive communication signals, use approved test leads and application-specific connection methods. The unit should be operated in a controlled test environment and disconnected from the power source before changing wiring, connectors, or configuration.
Custom Configurations
Beyond the standard configuration, RAYNOV can provide customized breakout box solutions adapted to specific harnesses, connectors, signal requirements, and testing environments.
Need a configuration adapted to your test setup? Contact our team to discuss your requirements.
The BOB-S-99P combines robust construction with versatile electrical and signal interfaces for reliable ECU testing, measurement, diagnostics, and validation. The key technical specifications are summarized below.
| Number of Channels | 99 |
|---|---|
| Enclosure Material | Aluminum |
| Weight | 2000 g |
| Rated Operating Voltage | 60 V DC |
| Continuous Current / Channel | 5 A |
| Total Simultaneous Current | 30 A |
| Operating Temperature | 0–60 °C |
| Equipment-Side Connector | 2 × 100P circular connectors |
| Measurement Sockets | 2 mm banana socket |
| Cable Length | 100 cm |
| Wire Cross Section | 0.5 mm² / 24 AWG |
| Circuit Interruption | Jumper 2 mm / 12 mm |
| Fault Insertion | 8 A CC |
| Signal Interfaces | CAN, LIN, DIO, PW, ANG |
Download the documentation and 3D CAD files you need to integrate the BOB-S-99P into your testing and development environment.
